Difficulty

Moderate

Steps

5

Time Required

                          5 - 15 minutes

Sections

1

  • Motor Assembly
  • 5 steps

Flags

0

  • BackGeneral Pipe Cleaners “Easy Rooter Junior” Drain Cleaner EJ-B (2014)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motor Assembly
  • Before you begin, make sure the drain cleaner is disconnected from power.
  • Loosen the belt guard knob enough to be able to slide the belt guard toward the front of the drain cleaner.

Before you begin, make sure the drain cleaner is disconnected from power.

Loosen the belt guard knob enough to be able to slide the belt guard toward the front of the drain cleaner.

1024

Step 2

  • Slide the belt guard toward the front of the drain cleaner and off of the motor.

Slide the belt guard toward the front of the drain cleaner and off of the motor.

Step 3

  • Push down on the motor to take tension off of the belt.
  • The motor mount is spring-loaded to keep tension on the belt.
  • Lift the belt off of the motor pulley and remove it from the motor.

Push down on the motor to take tension off of the belt.

The motor mount is spring-loaded to keep tension on the belt.

Lift the belt off of the motor pulley and remove it from the motor.

Step 4

  • Use two 1/2 inch wrenches to remove the four nut and bolt sets securing the motor to the drain cleaner.
  • During reassembly, make sure that the belt pulley on the motor is lined up with the belt groove on the cage before tightening the bolts.

Use two 1/2 inch wrenches to remove the four nut and bolt sets securing the motor to the drain cleaner.

During reassembly, make sure that the belt pulley on the motor is lined up with the belt groove on the cage before tightening the bolts.

Step 5

  • Remove the motor assembly.

Remove the motor assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                    Adam O'Camb

Member since: 04/11/2015

173,479 Reputation

                                      418 Guides authored                  



                       Badges:
                       39







                                                        +36 more badges