Difficulty

Moderate

Steps

1

Time Required

Suggest a time??

Sections

  • Honda GXV160UH2 Engine
  • 1 step

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackGeneral Equipment Augers M330H (2012)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Drain Liquids
  • To remove the engine from the auger, you will need to disassemble the Transmission Assembly, as some of the bolts that attach the Top Cover of the Transmission assembly can only be accessed internally.
  • There are two drain bolts on the transmission, one on the side of the case on the side of the machine with the air filter and throttle assembly, and one on the bottom of the case.
  • Remove the stamped 7/8" bolt on the side of the Transmission Assembly first, and allow to drain while level.
  • Then, remove the unmarked 7/8" drain bolt from the bottom of the Transmission Assembly and allow to drain.
  • Note: Braver technicians can skip removing the bottom drain bolt as long as they ensure that the Transmission Assembly is stored on a level surface, which can be a challenge for an auger, even with the bit removed.

To remove the engine from the auger, you will need to disassemble the Transmission Assembly, as some of the bolts that attach the Top Cover of the Transmission assembly can only be accessed internally.

There are two drain bolts on the transmission, one on the side of the case on the side of the machine with the air filter and throttle assembly, and one on the bottom of the case.

Remove the stamped 7/8" bolt on the side of the Transmission Assembly first, and allow to drain while level.

Then, remove the unmarked 7/8" drain bolt from the bottom of the Transmission Assembly and allow to drain.

Note: Braver technicians can skip removing the bottom drain bolt as long as they ensure that the Transmission Assembly is stored on a level surface, which can be a challenge for an auger, even with the bit removed.

1024

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    John Maginosa

Member since: 11/02/2020

73 Reputation

                                      1 Guide authored                  



                       Badges:
                       1

Team

                       The Home Depot                        

                                                  Member of The Home Depot 



                    Community                     


                                            10,914 Members                     


                                            33 Guides authored