Difficulty

Easy

Steps

10

Time Required

                          15 minutes

Sections

2

  • Disassembling General Electric Bagel Switch 4-Slice Toaster Outer Case
  • 3 steps
  • Bottom Plate
  • 7 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

  • BackGeneral Electric Bagel Switch 4 Slice

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling General Electric Bagel Switch 4-Slice Toaster Outer Case
  • Unplug the toaster from the electrical outlet.

Unplug the toaster from the electrical outlet.

1024

Step 2

  • Remove the two levers and four dials by pulling them out directly towards you.
  • Removing these components may require some force, but they will release.

Remove the two levers and four dials by pulling them out directly towards you.

Removing these components may require some force, but they will release.

Step 3

  • Look for the plastic clips on the back side of the toaster.
  • Disconnect the small plastic clips on the back of the toaster. Use Philips head Screwdriver to do this step.
  • Now, carefully remove the toaster casing.

Look for the plastic clips on the back side of the toaster.

Disconnect the small plastic clips on the back of the toaster. Use Philips head Screwdriver to do this step.

Now, carefully remove the toaster casing.

Step 4

              Bottom Plate
  • Turn the toaster upside down. Bagel slots are not showing.

Turn the toaster upside down. Bagel slots are not showing.

Step 5

  • Locate the screws that are holding the bottom plate onto the toaster. There are four (4) screws. (1 screw in each corner.)

Locate the screws that are holding the bottom plate onto the toaster. There are four (4) screws. (1 screw in each corner.)

Step 6

  • With a Phillips head screwdriver, remove all (4) of the screws.

With a Phillips head screwdriver, remove all (4) of the screws.

Step 7

  • You will notice that the cord for the plug is also attached to the bottom. You will need to remove it from the bottom plate.
  • The bottom plate is now free to be removed.

You will notice that the cord for the plug is also attached to the bottom. You will need to remove it from the bottom plate.

The bottom plate is now free to be removed.

Step 8

  • Now that the bottom plate is completely off, you can put the new bottom plate on.
  • You may damage parts if you do this step incorrectly.
  • Start by running the cord around the grooves of the bottom plate. Match up the cord with the same path that you removed the cord from the bottom plate. Make sure it lines up correctly.

Now that the bottom plate is completely off, you can put the new bottom plate on.

You may damage parts if you do this step incorrectly.

Start by running the cord around the grooves of the bottom plate. Match up the cord with the same path that you removed the cord from the bottom plate. Make sure it lines up correctly.

Step 9

  • Now the bottom plate is in place. Put the (4) four screws that hold it on, back into where you removed them from. Use the screwdriver to do this.
  • Once these (4) screws have been tightened, in the correct holes, you have finished replacing the bottom plate.

Now the bottom plate is in place. Put the (4) four screws that hold it on, back into where you removed them from. Use the screwdriver to do this.

Once these (4) screws have been tightened, in the correct holes, you have finished replacing the bottom plate.

Step 10

  • Turn the toaster right side up. Replacement is now complete.

Turn the toaster right side up. Replacement is now complete.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Jacqueline Tran

Member since: 10/29/2013

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team 4-4, Vijaybhaskar Fall 2013                        

                                                  Member of UMass Dartmouth, Team 4-4, Vijaybhaskar Fall 2013 



                    UMASSD-VIJAYBHASKAR-F13S4G4                     


                                            3 Members                     


                                            4 Guides authored