Geeksphone Keon Battery Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

Suggest a time??

Sections

1

• Battery
• 3 steps

Flags

0

• BackGeeksPhone Keon

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Insert the plastic opening tool into the seam between the front of the device and the rear cover.
• Slide the plastic opening tool from the bottom of the phone to the top.
• Use the plastic opening tool to free all the clips attached to the phone.

Insert the plastic opening tool into the seam between the front of the device and the rear cover.

Slide the plastic opening tool from the bottom of the phone to the top.

Use the plastic opening tool to free all the clips attached to the phone.

1024

Step 2

• Lift the cover away from the phone.

Lift the cover away from the phone.

Step 3

• Insert the plastic opening tool into the groove between the bottom of the phone and the battery.
• Lift the battery with the plastic opening tool and finish removing battery by hand.

Insert the plastic opening tool into the groove between the bottom of the phone and the battery.

Lift the battery with the plastic opening tool and finish removing battery by hand.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Yanni Worthington                     

Member since: 08/26/2015

325 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team 3-5, Eyestone Fall 2015                        

                                                  Member of USF Tampa, Team 3-5, Eyestone Fall 2015 



                    USFT-EYESTONE-F15S3G5                     


                                            4 Members                     


                                            12 Guides authored                     

gintasdx - Jun 19, 2016

Reply

Newer Keon model has user replaceable battery GP-BA002

Newer Keon model has a user replaceable battery Li-ion GP-BA002 3.7V 1580mAh .

Diego Gomez - May 11, 2021

Reply

GP-BA002: Li-ion, 3.7V ,1580mAh, Limited charge voltage 4.2v, with dimensions: 5.1x5.1x0.5cm, its a four pin battery, the pinout es: Negative, BSI, BTemp, Positive, both negative and positive al labeled on the front of the batery the other two not, BTemp is a 10k oms resistor and BSI reads 47k oms on a discharged battery

ecloud - Nov 4, 2022

Reply

Has anybody found another battery that is compatible with the GP-BA002?