Difficulty
Moderate
Steps
3
Time Required
2 hours
Sections
1
- Damper
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackGe Profile Refrigerator
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Video Overview
Step 1
Damper
- This video is about repairing a broken damper doo rather than replacing the regulator assembly.
This video is about repairing a broken damper doo rather than replacing the regulator assembly.
1024
Step 2
- All the steps are in the video but in general do the following.
All the steps are in the video but in general do the following.
Step 3
- Empty Fridge, remove the regulator at the top rear of the fridge, check and see if its a broken damper door. assuming it is remove the damper motor assembly with the broken door and use a heat gun to weld them back together. adjust the assembly as needed and replace the damper assembly and test.
Empty Fridge, remove the regulator at the top rear of the fridge, check and see if its a broken damper door. assuming it is remove the damper motor assembly with the broken door and use a heat gun to weld them back together. adjust the assembly as needed and replace the damper assembly and test.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Dan Dunham
Member since: 04/15/2017
3,126 Reputation
28 Guides authored
Badges:
17
+14 more badges