Difficulty

Difficult

Steps

8

Time Required

                          10 minutes

Sections

2

  • Outer Case
  • 5 steps
  • Speaker
  • 3 steps

Flags

1

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackGE 7-4836B

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Compartment Cover
  • Find the battery compartment on the bottom of the clock radio.
  • Using your thumb, push the compartment cover latch toward the battery.
  • With the latch pushed in, pull the compartment cover upward to remove it..

Find the battery compartment on the bottom of the clock radio.

Using your thumb, push the compartment cover latch toward the battery.

With the latch pushed in, pull the compartment cover upward to remove it..

1024

Step 2

              Battery
  • Lift the battery from the compartment.
  • Pull the battery up and gently disconnect it from the battery connector.

Lift the battery from the compartment.

Pull the battery up and gently disconnect it from the battery connector.

Step 3

              Screws
  • Using a Phillips #00 Screwdriver, unscrew the six 12mm screws from around the bottom of the clock radio.

Using a Phillips #00 Screwdriver, unscrew the six 12mm screws from around the bottom of the clock radio.

Step 4

              LCD Cover
  • Gently pull the liquid crystal display (LCD) cover off.

Gently pull the liquid crystal display (LCD) cover off.

Step 5

              Clock Radio
  • Lift the top off. Two gray, plastic internal pieces will fall out when you do this; set them aside.

Lift the top off. Two gray, plastic internal pieces will fall out when you do this; set them aside.

Step 6

              Speaker
  • Grip the speaker.
  • Lift the speaker from the holder.
  • Turn the speaker over.

Grip the speaker.

Lift the speaker from the holder.

Turn the speaker over.

Step 7

              Speaker from Wires
  • The red wire is the + and the tan wire is the -. These wires are connected with solder.
  • Apply the hot soldering iron tip to the speaker connection solder.
  • Pull the speaker away from the wires.

The red wire is the + and the tan wire is the -. These wires are connected with solder.

Apply the hot soldering iron tip to the speaker connection solder.

Pull the speaker away from the wires.

Step 8

              New Speaker
  • Attach a new 65 mm speaker, model #115048352530, with the wire connectors. Match the red wire to the + and the tan wire to the -.
  • Solder the wires to connect. Let the solder cool.
  • Reverse Step 6 to insert the new speaker in holder.

Attach a new 65 mm speaker, model #115048352530, with the wire connectors. Match the red wire to the + and the tan wire to the -.

Solder the wires to connect. Let the solder cool.

Reverse Step 6 to insert the new speaker in holder.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Dominick Giguere

Member since: 10/28/2014

848 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges