Difficulty

Easy

Steps

4

Time Required

                          15 - 20 minutes            

Sections

2

  • Battery
  • 2 steps
  • RAM
  • 2 steps

Flags

0

  • BackGateway W350I

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Access               
  • Turn the laptop upside down and position it as shown in the image.

Turn the laptop upside down and position it as shown in the image.

1024

Step 2

              Unlocking the Battery               
  • Slide the locking switch towards the open lock picture.
  • Hold the release switch in the unlocked position while simultaneously pushing the battery away from the laptop.
  • Once the laptop is disengaged, completely remove the battery from the laptop.

Slide the locking switch towards the open lock picture.

Hold the release switch in the unlocked position while simultaneously pushing the battery away from the laptop.

Once the laptop is disengaged, completely remove the battery from the laptop.

Step 3

              Remove Bottom Cover               
  • Turn the laptop over to remove the plastic cover.
  • Remove the single 3mm Phillips #0 screw holding on the plastic cover.
  • Use a plastic opening tool to gently pry off the plastic cover.

Turn the laptop over to remove the plastic cover.

Remove the single 3mm Phillips #0 screw holding on the plastic cover.

Use a plastic opening tool to gently pry off the plastic cover.

Step 4

              Removing RAM Chips               
  • Gently pull the first RAM chip to slide it free from the mounting on the board.
  • Gently pull the second RAM chip, located under the first, to slide it free from the mounting on the board.

Gently pull the first RAM chip to slide it free from the mounting on the board.

Gently pull the second RAM chip, located under the first, to slide it free from the mounting on the board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Aaron Austin                     

Member since: 09/22/2014

249 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       USF Tampa, Team 4-1, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 4-1, Brown Fall 2014 



                    USFT-BROWN-F14S4G1                     


                                            3 Members                     


                                            10 Guides authored