Difficulty

Moderate

Steps

8

Time Required

                          45 minutes

Sections

2

  • Battery
  • 2 steps
  • Display
  • 6 steps

Flags

0

  • BackGateway W350I

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Access
  • Turn the laptop upside down and position it as shown in the image.

Turn the laptop upside down and position it as shown in the image.

1024

Step 2

              Unlocking the Battery
  • Slide the locking switch towards the open lock picture.
  • Hold the release switch in the unlocked position while simultaneously pushing the battery away from the laptop.
  • Once the laptop is disengaged, completely remove the battery from the laptop.

Slide the locking switch towards the open lock picture.

Hold the release switch in the unlocked position while simultaneously pushing the battery away from the laptop.

Once the laptop is disengaged, completely remove the battery from the laptop.

Step 3

              Remove Rubber Protectors & Screws
  • Pry the six black rubber protectors out of the screw holes.
  • Remove all six of the 4mm Phillips #0 screws that were covered by the rubber protectors.

Pry the six black rubber protectors out of the screw holes.

Remove all six of the 4mm Phillips #0 screws that were covered by the rubber protectors.

Step 4

              Separate Plastic Casing
  • Separate the plastic screen casing from the laptop lid by inserting a plastic opening tool. Complete this step around the top and along both sides of the screen.

Separate the plastic screen casing from the laptop lid by inserting a plastic opening tool. Complete this step around the top and along both sides of the screen.

Step 5

              Remove Bracket from Laptop Lid
  • Remove the two 4mm Phillips #0 screws located at the top that fasten the screen bracket to the laptop.

Remove the two 4mm Phillips #0 screws located at the top that fasten the screen bracket to the laptop.

Step 6

              Remove LCD Screen from Bracket
  • Separate the bracket and the screen from its original position within the lid of the laptop.
  • Remove the four 4mm Phillips #0 screws on the sides of the bracket that hold the LCD screen.

Separate the bracket and the screen from its original position within the lid of the laptop.

Remove the four 4mm Phillips #0 screws on the sides of the bracket that hold the LCD screen.

Step 7

              Remove Video Cable
  • Detach the video cable that is attached to the laptop from the back of the screen.
  • Be careful while removing the video cable as it is very delicate.

Detach the video cable that is attached to the laptop from the back of the screen.

Be careful while removing the video cable as it is very delicate.

Step 8

  • Disconnect the camera connector from the circuit board to completely free the screen.

Disconnect the camera connector from the circuit board to completely free the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Samuel Newton

Member since: 09/22/2014

296 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 4-1, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 4-1, Brown Fall 2014 



                    USFT-BROWN-F14S4G1                     


                                            3 Members                     


                                            10 Guides authored

Stephan Williams - Oct 27, 2014

Reply

It was very easy to follow.

Very friendly guide.