Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • Wireless Card
  • 6 steps

Flags

4

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackGateway SA1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Wireless Card
  • The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.

The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.

1024

Step 2

  • Locate the wireless card on the right side of the now removed panel.

Locate the wireless card on the right side of the now removed panel.

Step 3

  • Remove the screws in the two possible locations.

Remove the screws in the two possible locations.

Step 4

  • After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.

After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.

Step 5

  • Pull the card diretly outward from its socket, all while being mindful of the connected wires.
  • Remove the wired connections by gently pulling them diretly away from the card. Please remember where each one was connected, it will be useful for reconnecting

Pull the card diretly outward from its socket, all while being mindful of the connected wires.

Remove the wired connections by gently pulling them diretly away from the card. Please remember where each one was connected, it will be useful for reconnecting

Step 6

  • Reconnect wires to new wireless card and screw back into place.

Reconnect wires to new wireless card and screw back into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Shawn Cabral

Member since: 03/12/2014

463 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 5-4, Cichon Spring 2014                        

                                                  Member of UMass Dartmouth, Team 5-4, Cichon Spring 2014 



                    UMASSD-CICHON-S14S5G4                     


                                            3 Members                     


                                            8 Guides authored