Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes            

Sections

2

  • Battery
  • 2 steps
  • Hard Drive
  • 3 steps

Flags

0

  • BackGateway SA1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Move the latch to the right of the battery to unlock.

Move the latch to the right of the battery to unlock.

1024

Step 2

  • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.
  • The latch must be held in position to remove the battery.

Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

The latch must be held in position to remove the battery.

Step 3

              Hard Drive               
  • Before you begin, it’s recommended that you back up all your computer’s information on the original hard drive. Also, verify the laptop is off and all cables are disconnected.
  • Turn the laptop over so the bottom is facing up.

Before you begin, it’s recommended that you back up all your computer’s information on the original hard drive. Also, verify the laptop is off and all cables are disconnected.

Turn the laptop over so the bottom is facing up.

Step 4

  • Loosen the three Philips cover screws that secure the hard drive.
  • These screws cannot be fully removed from the hard drive cover.
  • Use the spudger to lift and to remove the hard drive cover.

Loosen the three Philips cover screws that secure the hard drive.

These screws cannot be fully removed from the hard drive cover.

Use the spudger to lift and to remove the hard drive cover.

Step 5

  • Slide the original hard drive to the left and lift it to remove.
  • Insert the new hard drive.

Slide the original hard drive to the left and lift it to remove.

Insert the new hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Diego Carteno                     

Member since: 04/15/2010

258 Reputation

                                      7 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Cal Poly, Team 24-20, Regan Spring 2010                        

                                                  Member of Cal Poly, Team 24-20, Regan Spring 2010 



                    CPSU-REGAN-S10S24G20                     


                                            4 Members                     


                                            14 Guides authored