Difficulty
Easy
Steps
5
Time Required
Suggest a time??
Sections
2
- Battery
- 2 steps
- Disk Drive
- 3 steps
Flags
0
BackGateway SA1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Move the latch to the right of the battery to unlock.
Move the latch to the right of the battery to unlock.
1024
Step 2
- Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.
- The latch must be held in position to remove the battery.
Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.
The latch must be held in position to remove the battery.
Step 3
Disk Drive
- Unscrew the marked 5.9 mm Philips screw.
Unscrew the marked 5.9 mm Philips screw.
Step 4
- Use the spudger to pry out the Disk dive.
Use the spudger to pry out the Disk dive.
Step 5
- The disk drive should easily detach and can now be replaced.
The disk drive should easily detach and can now be replaced.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Diego Carteno
Member since: 04/15/2010
258 Reputation
7 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team 24-20, Regan Spring 2010
Member of Cal Poly, Team 24-20, Regan Spring 2010
CPSU-REGAN-S10S24G20
4 Members
14 Guides authored
