Difficulty
Moderate
Steps
4
Time Required
15 minutes
Sections
1
- RAM
- 4 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackGateway P-7805u
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Use the J0 screwdriver to remove the five 2mm screws holding the back plate.
Use the J0 screwdriver to remove the five 2mm screws holding the back plate.
1024
Step 2
- Push the upper RAM module’s two pins outwards at the same time.
- If done correctly, the module should lift.
Push the upper RAM module’s two pins outwards at the same time.
If done correctly, the module should lift.
Step 3
- Grab onto the module and pull away in a straight direction.
Grab onto the module and pull away in a straight direction.
Step 4
- Push the lower RAM module’s two pins outwards at the same time.
- If done correctly, the module should have lifted.
Push the lower RAM module’s two pins outwards at the same time.
If done correctly, the module should have lifted.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Emily Pendleton
Member since: 11/06/2017
401 Reputation
4 Guides authored
Badges:
4
+1 more badge
Team
Baylor, Team S8-G6, Johnson Fall 2017
Member of Baylor, Team S8-G6, Johnson Fall 2017
BU-JOHNSON-F17S8G6
2 Members
8 Guides authored
