Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Hard Drive
- 4 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackGateway P-7805u
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Unscrew all .5mm screws from the back rectangular panel. Use a J0 screwdriver.
- Screws will not come out all the way out. Simply unscrew until they do not come out any further.
Unscrew all .5mm screws from the back rectangular panel. Use a J0 screwdriver.
Screws will not come out all the way out. Simply unscrew until they do not come out any further.
1024
Step 2
- Firmly press with your hand on the silver surface and pull back, dislodging the hard drive from its port.
Firmly press with your hand on the silver surface and pull back, dislodging the hard drive from its port.
Step 3
- Remove the four 1.2mm screws attaching the case to the hard drive. Use the same J0 screwdriver.
Remove the four 1.2mm screws attaching the case to the hard drive. Use the same J0 screwdriver.
Step 4
- Pull out the old hard drive.
Pull out the old hard drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Emily Pendleton
Member since: 11/06/2017
401 Reputation
4 Guides authored
Badges:
4
+1 more badge
Team
Baylor, Team S8-G6, Johnson Fall 2017
Member of Baylor, Team S8-G6, Johnson Fall 2017
BU-JOHNSON-F17S8G6
2 Members
8 Guides authored