Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
1
- Keyboard
- 6 steps
Flags
0
BackGateway P-6831FX
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Open your laptop and lay it flat
- Locate the speaker grill/interaction bar.
Open your laptop and lay it flat
Locate the speaker grill/interaction bar.
1024
Step 2
- Remove the speaker grill/interaction bar by pulling up at both edges.
Remove the speaker grill/interaction bar by pulling up at both edges.
Step 3
- Detach the two ribbon cables on the underside of the keyboard.
Detach the two ribbon cables on the underside of the keyboard.
Step 4
- Remove the five Philips #0 (3mm) screws securing the keyboard in place.
Remove the five Philips #0 (3mm) screws securing the keyboard in place.
Step 5
- Pull the keyboard up and away from you.
Pull the keyboard up and away from you.
Step 6
- Remove the ribbon cable attached underneath to the keyboard.
Remove the ribbon cable attached underneath to the keyboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Justin Freitas
Member since: 03/19/2018
294 Reputation
2 Guides authored
Badges:
3
Team
UMass Dartmouth, Team S3-G5, Peak Spring 2018
Member of UMass Dartmouth, Team S3-G5, Peak Spring 2018
UMASSD-PEAK-S18S3G5
2 Members
12 Guides authored
