Difficulty
Easy
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Hard Drive
- 5 steps
Flags
0
BackGateway P-6831FX
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Turn your laptop upside down and remove the four Philips #0 (5mm) screws for the cover of the hard drive.
- Make sure to unplug your laptop charger, as removing the hard drive while the device is charging may damage the hard drive and or the charger.
Turn your laptop upside down and remove the four Philips #0 (5mm) screws for the cover of the hard drive.
Make sure to unplug your laptop charger, as removing the hard drive while the device is charging may damage the hard drive and or the charger.
1024
Step 2
- Gently pull the cover away from the device.
- Set the cover aside for now, until reassembly.
Gently pull the cover away from the device.
Set the cover aside for now, until reassembly.
Step 3
- Pull the plastic tab as shown to remove the hard drive from the device.
Pull the plastic tab as shown to remove the hard drive from the device.
Step 4
- Remove the four Philips #0 (3mm) screws around the case for the hard drive. There will be two screws and the left and right side.
Remove the four Philips #0 (3mm) screws around the case for the hard drive. There will be two screws and the left and right side.
Step 5
- Remove the hard drive from the case.
Remove the hard drive from the case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Chandler Jardin
Member since: 03/19/2018
507 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team S3-G5, Peak Spring 2018
Member of UMass Dartmouth, Team S3-G5, Peak Spring 2018
UMASSD-PEAK-S18S3G5
2 Members
12 Guides authored
