Difficulty
Difficult
Steps
13
Time Required
40 minutes
Sections
1
- LCD Display
- 13 steps
Flags
0
BackGateway NV59C66u
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD Display
- Remove the black covers over the two screen screws on the bottom corners and unscrew them with a Phillips #0 screwdriver.
Remove the black covers over the two screen screws on the bottom corners and unscrew them with a Phillips #0 screwdriver.
1024
Step 2
- Now gently remove the screen cover by pulling it apart on all sides with a plastic opening tool.
- The plastic frame surrounding the screen is very thin and can become brittle with age. Take your time when working the edges to prevent cracking the bezel.
Now gently remove the screen cover by pulling it apart on all sides with a plastic opening tool.
The plastic frame surrounding the screen is very thin and can become brittle with age. Take your time when working the edges to prevent cracking the bezel.
Step 3
- Carefully pull the latches off with a plastic opening tool.
Carefully pull the latches off with a plastic opening tool.
Step 4
- Use a Phillips #0 screwdriver to remove the screws located in the top corners of the screen
- make sure to keep all screws nearby and in a safe location so you don’t lose them.
Use a Phillips #0 screwdriver to remove the screws located in the top corners of the screen
make sure to keep all screws nearby and in a safe location so you don’t lose them.
Step 5
- Carefully pop the screen out but do not disconnect it from the cables just yet.
Carefully pop the screen out but do not disconnect it from the cables just yet.
Step 6
- Be sure to support the screen so the cables are not pulled tight. Setting the computer on it’s side can help with this.
Be sure to support the screen so the cables are not pulled tight. Setting the computer on it’s side can help with this.
Step 7
- Disconnect the LCD cables on the back of the screen and then remove the screen.
Disconnect the LCD cables on the back of the screen and then remove the screen.
Step 8
- set the damaged LCD display to the side and grab the new LCD display.
set the damaged LCD display to the side and grab the new LCD display.
Step 9
- Make sure to support the new LCD screen like you did the damaged one, and slowly reconnect the cables to the new display. Make sure the cables are in the right place.
Make sure to support the new LCD screen like you did the damaged one, and slowly reconnect the cables to the new display. Make sure the cables are in the right place.
Step 10
- set the new LCD screen in the computer make sure it is secure.
set the new LCD screen in the computer make sure it is secure.
Step 11
- Screw in all the screws to hold the screen in place.
Screw in all the screws to hold the screen in place.
Step 12
- reset the plastic case to hold the screen in place.
reset the plastic case to hold the screen in place.
Step 13
- Put all latches in the lock position and lightly press the plastic border to the screen to make sure it’s in place.
Put all latches in the lock position and lightly press the plastic border to the screen to make sure it’s in place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Brian Walker
Member since: 10/30/2019
145 Reputation
1 Guide authored
Badges:
2
Team
University of Memphis, Team S2-G4, Kim Fall 2019
Member of University of Memphis, Team S2-G4, Kim Fall 2019
UM-KIM-F19S2G4
4 Members
10 Guides authored
