Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- Screen
- 5 steps
Flags
7
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackGateway NV55S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove screw covers & screws
- At both sides of the bottom of the screen, there are screw covers. Use a flathead screwdriver to remove them.
- Behind each of them will be a screw. Unscrew each screw.
At both sides of the bottom of the screen, there are screw covers. Use a flathead screwdriver to remove them.
Behind each of them will be a screw. Unscrew each screw.
1024
Step 2
Remove LCD Bezel
- Use a spudger to remove the bezel.
Use a spudger to remove the bezel.
Step 3
Remove lid
- At each corner of the LCD will be one screw to remove. Remove each screw, disconnect the webcam (if applicable), and pull back on the lid.
- Don’t forget to disconnect the webcam before pulling the lid back!
At each corner of the LCD will be one screw to remove. Remove each screw, disconnect the webcam (if applicable), and pull back on the lid.
Don’t forget to disconnect the webcam before pulling the lid back!
Step 4
Remove LCD cable
- Separate all of the tape from the back of the LCD screen, and then pull straight back on the cable to remove it from the LCD.
Separate all of the tape from the back of the LCD screen, and then pull straight back on the cable to remove it from the LCD.
Step 5
Remove LCD
- On each side of the LCD, there are three screws holding it. Remove all of them. You’re done!
On each side of the LCD, there are three screws holding it. Remove all of them. You’re done!
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Joseph Sctbunio
Member since: 09/23/2017
6,982 Reputation
42 Guides authored
Badges:
21
+18 more badges