Difficulty
Moderate
Steps
14
Time Required
45 minutes
Sections
1
- USB Port
- 14 steps
Flags
0
BackGateway NV55C49u
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
USB Port
- Flip the laptop bottom side up.
Flip the laptop bottom side up.
1024
Step 2
- Slide the battery lock to show the red background.
Slide the battery lock to show the red background.
Step 3
- Push the battery slider to the other side. This will automatically eject the battery.
- You can now remove the battery
Push the battery slider to the other side. This will automatically eject the battery.
You can now remove the battery
Step 4
- Remove the two 6.0mm Phillips #00 screws from the back cover.
- Remove the back cover by placing a plastic opening tool in the indention and prying upwards.
Remove the two 6.0mm Phillips #00 screws from the back cover.
Remove the back cover by placing a plastic opening tool in the indention and prying upwards.
Step 5
- Remove all nine 6.0mm #00 Phillips screws from the back of the laptop.
Remove all nine 6.0mm #00 Phillips screws from the back of the laptop.
Step 6
- Remove the four 3.0mm Phillips #0 screws from the battery compartment.
Remove the four 3.0mm Phillips #0 screws from the battery compartment.
Step 7
- Flip the laptop over so that the cover faces you.
- Open the laptop so you can see the keyboard.
Flip the laptop over so that the cover faces you.
Open the laptop so you can see the keyboard.
Step 8
- Push in the tabs that are located around the keyboard using the triangle scalpel tool.
- This should release the keyboard so it can be pulled up
Push in the tabs that are located around the keyboard using the triangle scalpel tool.
This should release the keyboard so it can be pulled up
Step 9
- Slowly lift up the keyboard away from the laptop.
- Push on the sides on the black ribbon cable using 2 plastic opening tools to release it.
Slowly lift up the keyboard away from the laptop.
Push on the sides on the black ribbon cable using 2 plastic opening tools to release it.
Step 10
- Remove the 3 ribbon cables that are showing using the plastic opening tools.
Remove the 3 ribbon cables that are showing using the plastic opening tools.
Step 11
- Remove the disk drive cover on the right side of the laptop using the plastic opening tool.
- Slide the disc drive out of its compartment, using the metal spudger.
Remove the disk drive cover on the right side of the laptop using the plastic opening tool.
Slide the disc drive out of its compartment, using the metal spudger.
Step 12
- Lift the face plate off the laptop body.
Lift the face plate off the laptop body.
Step 13
- Remove the 6.0 mm Phillips #00 screw that holds in the USB port.
Remove the 6.0 mm Phillips #00 screw that holds in the USB port.
Step 14
- Push on the sides of the white ribbon cable that is attached to the motherboard using the 2 plastic opening tools to release it.
Push on the sides of the white ribbon cable that is attached to the motherboard using the 2 plastic opening tools to release it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Micaela
Member since: 10/16/2018
329 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
University of North Texas, Team S8-G1, Riccardelli Fall 2018
Member of University of North Texas, Team S8-G1, Riccardelli Fall 2018
UNT-RICCARDELLI-F18S8G1
5 Members
9 Guides authored
