Difficulty

Moderate

Steps

5

Time Required

                          15 minutes            

Sections

2

  • Base Cover
  • 2 steps
  • WiFi Card
  • 3 steps

Flags

1

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

  • BackGateway NV52

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Base Cover               
  • Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.

Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.

1024

Step 2

  • Lift up the base cover from the the top with your hands to a 90 degree angle.
  • Remove the base cover and place it in a safe and dry place.

Lift up the base cover from the the top with your hands to a 90 degree angle.

Remove the base cover and place it in a safe and dry place.

Step 3

              WiFi Card               
  • Remove the 3/16" screw located at the bottom left corner of the WiFi card using a Phillips #0 Screwdriver.

Remove the 3/16" screw located at the bottom left corner of the WiFi card using a Phillips #0 Screwdriver.

Step 4

  • Locate the black and white cables attached to the WiFi card.
  • Gently wiggle the black cable until it detaches from the WiFi card.
  • Repeat the previous step for the white cable.

Locate the black and white cables attached to the WiFi card.

Gently wiggle the black cable until it detaches from the WiFi card.

Repeat the previous step for the white cable.

Step 5

  • Gently, remove the Wifi card from its slot, and place it in a dry and safe place.

Gently, remove the Wifi card from its slot, and place it in a dry and safe place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Ruben                     

Member since: 04/22/2014

298 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team 7-24, Regan Spring 2014                        

                                                  Member of Cal Poly, Team 7-24, Regan Spring 2014 



                    CPSU-REGAN-S14S7G24                     


                                            4 Members                     


                                            18 Guides authored