Difficulty

Moderate

Steps

8

Time Required

                          2 - 3 minutes

Sections

2

  • Battery
  • 3 steps
  • Wireless card
  • 5 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackGATEWAY NE56R09u

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before doing anything, first make sure the laptop is turned off and flipped over. In this position your laptop’s bottom side should be facing up.

Before doing anything, first make sure the laptop is turned off and flipped over. In this position your laptop’s bottom side should be facing up.

1024

Step 2

  • Using a nylon spudger or your fingers, push down on the battery clip to release the battery.

Using a nylon spudger or your fingers, push down on the battery clip to release the battery.

Step 3

  • Finally, remove the battery by detaching it from the laptop casing. Once removed, set the battery aside and insert the new battery.

Finally, remove the battery by detaching it from the laptop casing. Once removed, set the battery aside and insert the new battery.

Step 4

              Wireless card
  • Next, using the PH1 head from the tool kit and the adjustable screwdriver, remove the 2 M3x5.0mm screws on the casing to get to the wireless card.

Next, using the PH1 head from the tool kit and the adjustable screwdriver, remove the 2 M3x5.0mm screws on the casing to get to the wireless card.

Step 5

  • Once the cover is off, locate the wireless card.

Once the cover is off, locate the wireless card.

Step 6

  • When located, remove the black and white cables from the wireless card. These are main and auxiliary antenna câbles.

When located, remove the black and white cables from the wireless card. These are main and auxiliary antenna câbles.

Step 7

  • Using the PH1 head from the tool kit and the adjustable screwdriver, remove the M3x5.0mm screw with that is keeping the wireless card intact.

Using the PH1 head from the tool kit and the adjustable screwdriver, remove the M3x5.0mm screw with that is keeping the wireless card intact.

Step 8

  • Remove the wireless card from the laptop

Remove the wireless card from the laptop

To reassemble your device, please follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Luis Cardoso

Member since: 04/01/2019

171 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team S6-G1, Peak Spring 2019                        

                                                  Member of UMass Dartmouth, Team S6-G1, Peak Spring 2019 



                    UMASSD-PEAK-S19S6G1                     


                                            2 Members                     


                                            8 Guides authored