Gateway Ne56R09U Ram Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          5 minutes            

Sections

2

• Battery
• 3 steps
• RAM
• 4 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackGATEWAY NE56R09u

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Before doing anything, first make sure the laptop is turned off and flipped over. In this position your laptop’s bottom side should be facing up.

Before doing anything, first make sure the laptop is turned off and flipped over. In this position your laptop’s bottom side should be facing up.

1024

Step 2

• Using a nylon spudger or your fingers, push down on the battery clip to release the battery.

Using a nylon spudger or your fingers, push down on the battery clip to release the battery.

Step 3

• Finally, remove the battery by detaching it from the laptop casing. Once removed, set the battery aside and insert the new battery.

Finally, remove the battery by detaching it from the laptop casing. Once removed, set the battery aside and insert the new battery.

Step 4

              RAM               

• Locate the casing that protects the RAM modules, wireless card, and hard drive.

Locate the casing that protects the RAM modules, wireless card, and hard drive.

Step 5

• With the PH1 head from the tool kit and the adjustable screwdriver, remove the 2 M3x5.0mm screws on the casing to get to the RAM modules.

With the PH1 head from the tool kit and the adjustable screwdriver, remove the 2 M3x5.0mm screws on the casing to get to the RAM modules.

Step 6

• On each RAM module there are two silver latches holding them in place
• Release the latches to be able to remove the RAM module.

On each RAM module there are two silver latches holding them in place

Release the latches to be able to remove the RAM module.

Step 7

• Remove the RAM modules from their respected slots.

Remove the RAM modules from their respected slots.

To reassemble your device, please follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    joshua depina                     

Member since: 03/25/2019

401 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UMass Dartmouth, Team S6-G1, Peak Spring 2019                        

                                                  Member of UMass Dartmouth, Team S6-G1, Peak Spring 2019 



                    UMASSD-PEAK-S19S6G1                     


                                            2 Members                     


                                            8 Guides authored