Difficulty
Moderate
Steps
5
Time Required
7 - 10 minutes
Sections
2
- Battery
- 2 steps
- Upper Case
- 3 steps
Flags
0
BackGateway NE52214U
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure to power down and turn off the laptop before proceeding with this guide.
- Flip over the laptop.
Make sure to power down and turn off the laptop before proceeding with this guide.
Flip over the laptop.
1024
Step 2
- Slide the tab to the left and hold the tab there.
- While holding down the sliding tab, remove the battery from the device.
Slide the tab to the left and hold the tab there.
While holding down the sliding tab, remove the battery from the device.
Step 3
Upper Case
- After removing the battery, remove 15 7mm screws using the Phillip #1 Screwdriver.
After removing the battery, remove 15 7mm screws using the Phillip #1 Screwdriver.
Step 4
- Flip over the laptop and open it so the screen is facing you.
Flip over the laptop and open it so the screen is facing you.
Step 5
- Lift the upper case cover off of the device. Use a prying tool along the edges if necessary.
Lift the upper case cover off of the device. Use a prying tool along the edges if necessary.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kelsey Rodrigues
Member since: 10/23/2018
495 Reputation
5 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S1-G1, Simcock Fall 2018
Member of UMass Dartmouth, Team S1-G1, Simcock Fall 2018
UMASSD-SIMCOCK-F18S1G1
3 Members
10 Guides authored
