Gateway Ne51006U Ram Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          1 - 3 minutes            

Sections

2

• Hard Drive
• 5 steps
• RAM
• 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackGateway NE51006u

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Hard Drive               

• Ensure device is powered off and unplugged from a power source. Place the device upside down.

Ensure device is powered off and unplugged from a power source. Place the device upside down.

1024

Step 2

• Use a PH0 Phillips head screwdriver to remove the 9.0 mm screw on the rectangular panel underneath the device.

Use a PH0 Phillips head screwdriver to remove the 9.0 mm screw on the rectangular panel underneath the device.

Step 3

• Use a plastic opening tool to pry open the rectangular panel the 9.0 mm screw was removed from.

Use a plastic opening tool to pry open the rectangular panel the 9.0 mm screw was removed from.

Step 4

• Remove a single 9.0 mm screw on the silver box containing the hard drive. Pull the plastic flap at the side opposite to the side of the screw housing back in order to remove the silver box containing the hard drive.

Remove a single 9.0 mm screw on the silver box containing the hard drive. Pull the plastic flap at the side opposite to the side of the screw housing back in order to remove the silver box containing the hard drive.

Step 5

• Remove the two 9.0 mm screws on each side of the silver box to slide the hard drive from the silver box housing.

Remove the two 9.0 mm screws on each side of the silver box to slide the hard drive from the silver box housing.

Step 6

              RAM               

• Use your fingers to pull the two metal hinges on either side of the RAM card.
• From here the card should lift upwards and pull off of the device easily.

Use your fingers to pull the two metal hinges on either side of the RAM card.

From here the card should lift upwards and pull off of the device easily.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Omer Tunagur                     

Member since: 01/29/2018

423 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       University of Alabama, Team S2-G8, Bedsole Spring 2018                        

                                                  Member of University of Alabama, Team S2-G8, Bedsole Spring 2018 



                    UA-BEDSOLE-S18S2G8                     


                                            4 Members                     


                                            10 Guides authored