Difficulty

Moderate

Steps

10

Time Required

                          15 minutes

Sections

2

  • Battery
  • 3 steps
  • Screen
  • 7 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackGateway MS2370

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure the laptop is turned off and flipped over so that the bottom is facing up. Then, locate the battery clip as shown.

Make sure the laptop is turned off and flipped over so that the bottom is facing up. Then, locate the battery clip as shown.

1024

Step 2

  • Either using your fingers or a plastic spudger push the battery clip to the left to release battery.

Either using your fingers or a plastic spudger push the battery clip to the left to release battery.

Step 3

  • Pull the battery from the laptop to remove it.

Pull the battery from the laptop to remove it.

Step 4

              Screen
  • Using the pointed tweezers, remove plastic circles that are stuck onto the back of the laptop’s hinges.
  • These plastic circles are stuck inside the hole with adhesive and might require a significant amount of force.

Using the pointed tweezers, remove plastic circles that are stuck onto the back of the laptop’s hinges.

These plastic circles are stuck inside the hole with adhesive and might require a significant amount of force.

Step 5

  • Unscrew both of the 3mm Phillips 01 screws on both hinges using the matching screwdriver.

Unscrew both of the 3mm Phillips 01 screws on both hinges using the matching screwdriver.

Step 6

  • Take the plastic spudger and pull up the tabs on all four sides of the screen molding.

Take the plastic spudger and pull up the tabs on all four sides of the screen molding.

Step 7

  • Carefully remove the screen molding. Be aware that the screen molding will not come out all the way.

Carefully remove the screen molding. Be aware that the screen molding will not come out all the way.

Step 8

  • Unscrew the four 3mm inch Phillips 01 screws on the screen bracket.

Unscrew the four 3mm inch Phillips 01 screws on the screen bracket.

Step 9

  • Peel up the tape over the connector and unplug the screen from the laptop.

Peel up the tape over the connector and unplug the screen from the laptop.

Step 10

  • Slowly remove the screen from the laptop.

Slowly remove the screen from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Mathieu Bolduc-Clayton

Member since: 10/17/2017

518 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team S1-G5, Simcock Fall 2017                        

                                                  Member of UMass Dartmouth, Team S1-G5, Simcock Fall 2017 



                    UMASSD-SIMCOCK-F17S1G5                     


                                            3 Members                     


                                            10 Guides authored