Difficulty

Difficult

Steps

14

Time Required

                          25 minutes

Sections

2

  • Battery
  • 3 steps
  • RAM
  • 11 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackGateway MS2370

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure the laptop is turned off and flipped over so that the bottom is facing up. Then, locate the battery clip as shown.

Make sure the laptop is turned off and flipped over so that the bottom is facing up. Then, locate the battery clip as shown.

1024

Step 2

  • Either using your fingers or a plastic spudger push the battery clip to the left to release battery.

Either using your fingers or a plastic spudger push the battery clip to the left to release battery.

Step 3

  • Pull the battery from the laptop to remove it.

Pull the battery from the laptop to remove it.

Step 4

              RAM
  • Unscrew the three 10mm inch Phillips 01 screws on the back of your laptop.
  • Unplug everything from the USB and SD ports.

Unscrew the three 10mm inch Phillips 01 screws on the back of your laptop.

Unplug everything from the USB and SD ports.

Step 5

  • Remove the cover panel.
  • This exposes more screws that must be removed.

Remove the cover panel.

This exposes more screws that must be removed.

Step 6

  • Unplug the two exposed cables from the motherboard.

Unplug the two exposed cables from the motherboard.

Step 7

  • Unscrew the rest of the case screws which include several 10mm 01 Phillips screws and three 3mm 00 Phillips screws.
  • This marked screw will not fully come out. Just loosen it and leave it there it will not effect the rest of the replacement.

Unscrew the rest of the case screws which include several 10mm 01 Phillips screws and three 3mm 00 Phillips screws.

This marked screw will not fully come out. Just loosen it and leave it there it will not effect the rest of the replacement.

Step 8

  • Pry the laptop case apart.
  • The disc drive in this photo was removed. You can remove it just by puling it out when the previous step is completed.

Pry the laptop case apart.

The disc drive in this photo was removed. You can remove it just by puling it out when the previous step is completed.

Step 9

  • Unplug the track-pad and the keyboard ribbon cable by lifting up the grey flap and removing the cable.
  • This cable has a special connector the requires you to lift open a grey flap to unplug properly.
  • The keyboard plug is located at the center of the motherboard and can be unplugged like a normal cable.

Unplug the track-pad and the keyboard ribbon cable by lifting up the grey flap and removing the cable.

This cable has a special connector the requires you to lift open a grey flap to unplug properly.

The keyboard plug is located at the center of the motherboard and can be unplugged like a normal cable.

Step 10

  • Remove the top half of the case.

Remove the top half of the case.

Step 11

  • Unscrew all 5 10mm inch Phillips 01 screws.
  • One more off screen

Unscrew all 5 10mm inch Phillips 01 screws.

One more off screen

Step 12

  • Unplug the ribbon cable connected to the USB Hub, the network card, and the monitor cable.

Unplug the ribbon cable connected to the USB Hub, the network card, and the monitor cable.

Step 13

  • Flip the motherboard over.

Flip the motherboard over.

Step 14

  • Using your two thumbs to pull outwards from the inside of the RAM slot to release and remove the RAM.
  • The last step of this replacement guide is not required to complete the fan replacement guide.

Using your two thumbs to pull outwards from the inside of the RAM slot to release and remove the RAM.

The last step of this replacement guide is not required to complete the fan replacement guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Mathieu Bolduc-Clayton

Member since: 10/17/2017

518 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team S1-G5, Simcock Fall 2017                        

                                                  Member of UMass Dartmouth, Team S1-G5, Simcock Fall 2017 



                    UMASSD-SIMCOCK-F17S1G5                     


                                            3 Members                     


                                            10 Guides authored