Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

2

  • Battery
  • 5 steps
  • Keyboard
  • 5 steps

Flags

3

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackGATEWAY ML6720

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Flip the laptop on to the backside.

Flip the laptop on to the backside.

1024

Step 2

  • Locate the battery at the very top on the backside of the laptop.

Locate the battery at the very top on the backside of the laptop.

Step 3

  • Slide the latch in the top right corner to the right, to set it to unlocked.

Slide the latch in the top right corner to the right, to set it to unlocked.

Step 4

  • Hold the other latch in the top left corner to the left.
  • hold it in that place with your thumb until the completion of the next step. (This step unlocks the second latch.)

Hold the other latch in the top left corner to the left.

hold it in that place with your thumb until the completion of the next step. (This step unlocks the second latch.)

Step 5

  • With both latches unlocked you can now slide out the battery, by pushing it off the top.

With both latches unlocked you can now slide out the battery, by pushing it off the top.

Step 6

              Keyboard
  • Turn the laptop on its backside with the stickers and barcode facing you.

Turn the laptop on its backside with the stickers and barcode facing you.

Step 7

  • Remove the six 2.0mm Phillips screws and panels from the back of the RAM, motherboard, and laptop fan.

Remove the six 2.0mm Phillips screws and panels from the back of the RAM, motherboard, and laptop fan.

Step 8

  • Remove the twelve identical 2.0mm Phillips Screws located around the back of the laptop using the Phillips #0 Screwdriver.
  • Remove the entire back panel of the laptop

Remove the twelve identical 2.0mm Phillips Screws located around the back of the laptop using the Phillips #0 Screwdriver.

Remove the entire back panel of the laptop

Step 9

  • Using a pair of tweezers or the tip of your screw driver, dig into the laptop cover and apply force to pop it out.
  • Do this on the right and left sides of the cover

Using a pair of tweezers or the tip of your screw driver, dig into the laptop cover and apply force to pop it out.

Do this on the right and left sides of the cover

Step 10

  • Pull up the keyboard with your finger

Pull up the keyboard with your finger

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Nathan Da Silva

Member since: 10/19/2016

401 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team 2-3, Isaacson Fall 2016                        

                                                  Member of UMass Dartmouth, Team 2-3, Isaacson Fall 2016 



                    UMASSD-ISAACSON-F16S2G3                     


                                            2 Members                     


                                            10 Guides authored