Difficulty
Easy
Steps
4
Time Required
3 minutes
Sections
1
- Hard Drive
- 4 steps
Flags
0
BackGateway MA7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- To prevent injury, make sure the laptop is unplugged and off before removing the battery.
- To unlock the battery slide the switch to the right in the upper right hand corner.
To prevent injury, make sure the laptop is unplugged and off before removing the battery.
To unlock the battery slide the switch to the right in the upper right hand corner.
1024
Step 2
- Remove the two 6 mm Phillips #0 screws from the back of the hard drive cover.
Remove the two 6 mm Phillips #0 screws from the back of the hard drive cover.
Step 3
- Press down firmly on the hard drive and pull leftwards.
Press down firmly on the hard drive and pull leftwards.
Step 4
- Remove two 4 mm Phillips #0 screws from the plastic hard drive cover.
- Lift the hard drive up from the plastic cover.
Remove two 4 mm Phillips #0 screws from the plastic hard drive cover.
Lift the hard drive up from the plastic cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
De’Andra Clarke
Member since: 03/19/2018
109 Reputation
1 Guide authored
Badges:
3
Team
UMass Dartmouth, Team S6-G2, Bernier Spring 2018
Member of UMass Dartmouth, Team S6-G2, Bernier Spring 2018
UMASSD-BERNIER-S18S6G2
3 Members
8 Guides authored