Difficulty
Easy
Steps
4
Time Required
1 minute
Sections
2
- Battery
- 2 steps
- Hard Drive
- 2 steps
Flags
1
Missed a Step
Oops! This guide is currently missing some important steps.
BackGateway MA6 Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- To prevent injury, make sure the laptop is unplugged before removing the battery.
- Make sure the switch in the upper right corner of the laptop is switched to the “unlock” position (toward the unlocked padlock icon).
To prevent injury, make sure the laptop is unplugged before removing the battery.
Make sure the switch in the upper right corner of the laptop is switched to the “unlock” position (toward the unlocked padlock icon).
1024
Step 2
- Pull the switch on the upper lefthand corner of the laptop towards the unlocked padlock icon.
- Firmly pull the battery outwards and away from the laptop.
Pull the switch on the upper lefthand corner of the laptop towards the unlocked padlock icon.
Firmly pull the battery outwards and away from the laptop.
Step 3
Hard Drive
- Remove the two 9 mm Phillips #0 screws from the back of the hard drive cover.
Remove the two 9 mm Phillips #0 screws from the back of the hard drive cover.
Step 4
- Press thumb down firmly on the hard drive and pull outwards to the side.
Press thumb down firmly on the hard drive and pull outwards to the side.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Chris Naughton
Member since: 04/07/2014
705 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 6-2, Forte Spring 2014
Member of Cal Poly, Team 6-2, Forte Spring 2014
CPSU-FORTE-S14S6G2
5 Members
20 Guides authored
Reed Roloff - Jun 13, 2018
Reply
It only took 2 minutes once I found te right screwdriver. Great aid!