Difficulty

Easy

Steps

6

Time Required

                          5 - 7 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Panel
  • 2 steps
  • RAM
  • 2 steps

Flags

0

  • BackGateway M-460

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • To prevent injury, make sure the laptop is not plugged in while removing the battery!
  • Make the switch in the upper right corner of the turned over laptop is switched to the “unlocked” position. (the unlocked padlock icon)

To prevent injury, make sure the laptop is not plugged in while removing the battery!

Make the switch in the upper right corner of the turned over laptop is switched to the “unlocked” position. (the unlocked padlock icon)

1024

Step 2

  • Push the switch to the right, toward the inside of the computer to dislodge the battery.
  • Finally, pull the battery outwards and away from the laptop as depicted in this image.

Push the switch to the right, toward the inside of the computer to dislodge the battery.

Finally, pull the battery outwards and away from the laptop as depicted in this image.

Step 3

              Back Panel
  • Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.

Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.

Step 4

  • Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.

Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.

Step 5

              RAM
  • Remember to always remove or disconnect the battery!
  • Push outwards on the metal tab to unlock the RAM stick from its position.

Remember to always remove or disconnect the battery!

Push outwards on the metal tab to unlock the RAM stick from its position.

Step 6

  • Lift up and remove the RAM from the device.
  • Follow the same steps to remove the second RAM stick from your device.

Lift up and remove the RAM from the device.

Follow the same steps to remove the second RAM stick from your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Tanya Jain

Member since: 03/19/2018

317 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S3-G2, Peak Spring 2018                        

                                                  Member of UMass Dartmouth, Team S3-G2, Peak Spring 2018 



                    UMASSD-PEAK-S18S3G2                     


                                            2 Members                     


                                            14 Guides authored