Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
2
- Battery
- 2 steps
- CD Drive
- 3 steps
Flags
0
BackGateway M-460
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- To prevent injury, make sure the laptop is not plugged in while removing the battery!
- Make the switch in the upper right corner of the turned over laptop is switched to the “unlocked” position. (the unlocked padlock icon)
To prevent injury, make sure the laptop is not plugged in while removing the battery!
Make the switch in the upper right corner of the turned over laptop is switched to the “unlocked” position. (the unlocked padlock icon)
1024
Step 2
- Push the switch to the right, toward the inside of the computer to dislodge the battery.
- Finally, pull the battery outwards and away from the laptop as depicted in this image.
Push the switch to the right, toward the inside of the computer to dislodge the battery.
Finally, pull the battery outwards and away from the laptop as depicted in this image.
Step 3
CD Drive
- Using the Phillips #1 screwdriver, remove the indicated 6mm screw holding the CD drive.
Using the Phillips #1 screwdriver, remove the indicated 6mm screw holding the CD drive.
Step 4
- Using the screwdriver, push the release button for the CD drive.
Using the screwdriver, push the release button for the CD drive.
Step 5
- Remove the CD drive from the device.
Remove the CD drive from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Femi
Member since: 04/06/2018
219 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S3-G7, Peak Fall 2018
Member of UMass Dartmouth, Team S3-G7, Peak Fall 2018
UMASSD-PEAK-F18S3G7
3 Members
8 Guides authored