Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes

Sections

3

  • Outer Casing
  • 5 steps
  • Battery
  • 2 steps
  • Speakers
  • 1 step

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackGarmin StreetPilot c330

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Outer Casing
  • At the top of the outer frame, insert the plastic spudger into the groove in the center.
  • Lever the frame gently until it pops out of the case.

At the top of the outer frame, insert the plastic spudger into the groove in the center.

Lever the frame gently until it pops out of the case.

1024

Step 2

  • Use a Phillips #00 screwdriver to remove the four screws around the screen.

Use a Phillips #00 screwdriver to remove the four screws around the screen.

Step 3

  • Gently pull from both ends of the casing to separate the front and back panels.
  • Do not force the pieces apart wider than the length of the connecting wires, or you will damage the wiring.

Gently pull from both ends of the casing to separate the front and back panels.

Do not force the pieces apart wider than the length of the connecting wires, or you will damage the wiring.

Step 4

  • Gently unplug the white cable connector using either your fingers or tweezers.

Gently unplug the white cable connector using either your fingers or tweezers.

Step 5

  • Carefully expose both halves of the device.
  • Be sure not to pull the two halves apart further than the black wire can reach.

Carefully expose both halves of the device.

Be sure not to pull the two halves apart further than the black wire can reach.

Step 6

              Battery
  • Use a Phillips #00 screwdriver to remove the two screws from the battery bracket.

Use a Phillips #00 screwdriver to remove the two screws from the battery bracket.

Step 7

  • Carefully peel the metal bracket away from the battery.
  • Pull the battery away from the back cover.
  • Desolder the wires from the speakers using a soldering iron.

Carefully peel the metal bracket away from the battery.

Pull the battery away from the back cover.

Desolder the wires from the speakers using a soldering iron.

Step 8

              Speakers
  • Carefully use the spudger to pry the speakers from the outer casing.
  • Once removed, you may use a soldering iron to remove the wires from the speakers.

Carefully use the spudger to pry the speakers from the outer casing.

Once removed, you may use a soldering iron to remove the wires from the speakers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 


                    Michael

Member since: 10/07/2010

107 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 22-1, Maness Fall 2010                        

                                                  Member of Cal Poly, Team 22-1, Maness Fall 2010 



                    CPSU-MANESS-F10S22G1                     


                                            3 Members                     


                                            4 Guides authored