Garmin Rino 700 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          35 - 40 minutes

Sections

Battery Disconnect
3 steps
Motherboard
2 steps
Screen
1 step

Flags

BackGarmin Rino 700
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery Disconnect

Flip the Garmin Rino 700 over so that the underside is facing up.
Using the TR6 Torx Security screwdriver, remove the six 9.5 mm screws on the backside of the device.

Flip the Garmin Rino 700 over so that the underside is facing up.

Using the TR6 Torx Security screwdriver, remove the six 9.5 mm screws on the backside of the device.

1024

Step 2

Remove the battery cover and set it to the side.

Remove the battery cover and set it to the side.

Step 3

Use the spudger to disconnect the battery wire port from the motherboard.

Use the spudger to disconnect the battery wire port from the motherboard.

Step 4

              Motherboard

Using the T5 Torx screwdriver, remove the two 6.4 mm screws on the motherboard.

Using the T5 Torx screwdriver, remove the two 6.4 mm screws on the motherboard.

Step 5

Using the nylon spudger, lift the motherboard out of its position.
Slide the motherboard out of the front panel of the device.
Carefully disconnect the motherboard from the panel and remove it out of the device.

Using the nylon spudger, lift the motherboard out of its position.

Slide the motherboard out of the front panel of the device.

Carefully disconnect the motherboard from the panel and remove it out of the device.

Step 6

              Screen

Carefully detach the screen at the bottom connections using your hands to reveal the ribbon connection.
For a guide on disconnecting and reconnecting the Zero Insertion Force (ZIF) connectors, please visit this guide.

Carefully detach the screen at the bottom connections using your hands to reveal the ribbon connection.

For a guide on disconnecting and reconnecting the Zero Insertion Force (ZIF) connectors, please visit this guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Abigail Dugan

Member since: 09/28/2021

512 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Clemson, Team 5-5, Hunter Fall 2021                        

                                                  Member of Clemson, Team 5-5, Hunter Fall 2021 



                    CLEM-HUNTER-F21S5G5                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team