Difficulty

Easy

Steps

4

Time Required

                          10 - 15 minutes

Sections

2

  • Battery Disconnect
  • 3 steps
  • Battery
  • 1 step

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackGarmin Rino 700

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This guide would be helpful when your charger or battery might be faulty. You would replace the battery after you have exhausted all possible options like screen brightness, map drawing speed, bluetooth features, etc for causing your battery to die quickly. There aren’t really any hazards you should be concerned about just be careful when disconnected the wire port from the motherboard. Going forward, you can see how to prevent these issues on our troubleshooting page: Garmin Rino 700 Troubleshooting

What you need

Step 1

              Battery Disconnect
  • Flip the Garmin Rino 700 over so that the underside is facing up.
  • Using the TR6 Torx Security screwdriver, remove the six 9.5 mm screws on the backside of the device.

Flip the Garmin Rino 700 over so that the underside is facing up.

Using the TR6 Torx Security screwdriver, remove the six 9.5 mm screws on the backside of the device.

1024

Step 2

  • Remove the battery cover and set it to the side.

Remove the battery cover and set it to the side.

Step 3

  • Use the spudger to disconnect the battery wire port from the motherboard.

Use the spudger to disconnect the battery wire port from the motherboard.

Step 4

              Battery
  • Using a Phillips #000 screwdriver, remove the two 4.8 mm screws holding the battery bracket in place.
  • Using a plastic opening tool, remove the battery from the back case of the device.

Using a Phillips #000 screwdriver, remove the two 4.8 mm screws holding the battery bracket in place.

Using a plastic opening tool, remove the battery from the back case of the device.

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Abigail Dugan

Member since: 09/28/2021

512 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Clemson, Team 5-5, Hunter Fall 2021                        

                                                  Member of Clemson, Team 5-5, Hunter Fall 2021 



                    CLEM-HUNTER-F21S5G5                     


                                            4 Members                     


                                            5 Guides authored