Difficulty
Difficult
Steps
5
Time Required
Suggest a time??
Sections
2
- Screen
- 4 steps
- Speaker
- 1 step
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackGarmin nuviCam LMTHD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Screen
- Remove the four 6.9 mm black screws using the T6 screw bit.
Remove the four 6.9 mm black screws using the T6 screw bit.
1024
Step 2
- Pry the device open using a plastic opening tool.
- We suggest starting from the dash camera side for easier opening
- You may have to use a little force, the screen is hard to remove.
Pry the device open using a plastic opening tool.
We suggest starting from the dash camera side for easier opening
You may have to use a little force, the screen is hard to remove.
Step 3
- Disconnect the black and red wire from the screen.
Disconnect the black and red wire from the screen.
Step 4
- Disconnect the orange strip by flipping up the connector with a plastic opening tool and sliding the cable out.
Disconnect the orange strip by flipping up the connector with a plastic opening tool and sliding the cable out.
Step 5
Speaker
- Locate the speaker in the corner opposite of the dashcam.
- Pry speaker out of device using a plastic opening tool.
Locate the speaker in the corner opposite of the dashcam.
Pry speaker out of device using a plastic opening tool.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Riki Wippel
Member since: 01/19/2017
419 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Eastern Washington University, Team 1-6, Mathisen Winter 2017
Member of Eastern Washington University, Team 1-6, Mathisen Winter 2017
EWU-MATHISEN-W17S1G6
4 Members
5 Guides authored