Garmin Nuvicam Lmthd Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          15 minutes            

Sections

2

• Screen
• 4 steps
• Motherboard
• 7 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackGarmin nuviCam LMTHD

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Screen               

• Remove the four 6.9 mm black screws using the T6 screw bit.

Remove the four 6.9 mm black screws using the T6 screw bit.

1024

Step 2

• Pry the device open using a plastic opening tool.
• We suggest starting from the dash camera side for easier opening
• You may have to use a little force, the screen is hard to remove.

Pry the device open using a plastic opening tool.

We suggest starting from the dash camera side for easier opening

You may have to use a little force, the screen is hard to remove.

Step 3

• Disconnect the black and red wire from the screen.

Disconnect the black and red wire from the screen.

Step 4

• Disconnect the orange strip by flipping up the connector with a plastic opening tool and sliding the cable out.

Disconnect the orange strip by flipping up the connector with a plastic opening tool and sliding the cable out.

Step 5

              Motherboard               

• Disconnect battery wire from motherboard.

Disconnect battery wire from motherboard.

Step 6

• Disconnect yellow ribbon cable from motherboard.

Disconnect yellow ribbon cable from motherboard.

Step 7

• Pull off black and red wire from screen.

Pull off black and red wire from screen.

Step 8

• Disconnect the orange cable strip connected to the screen using a plastic opening tool, lift white teeth up and slide strip out.

Disconnect the orange cable strip connected to the screen using a plastic opening tool, lift white teeth up and slide strip out.

Step 9

• Remove silver plate from motherboard.

Remove silver plate from motherboard.

Step 10

• Remove all six 5.74mm screws from motherboard using the T4 screw bit.

Remove all six 5.74mm screws from motherboard using the T4 screw bit.

Step 11

• Lift motherboard out of device using plastic opening tools.

Lift motherboard out of device using plastic opening tools.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Riki Wippel                     

Member since: 01/19/2017

419 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Eastern Washington University, Team 1-6, Mathisen Winter 2017                        

                                                  Member of Eastern Washington University, Team 1-6, Mathisen Winter 2017 



                    EWU-MATHISEN-W17S1G6                     


                                            4 Members                     


                                            5 Guides authored                     

pitt83 - May 29, 2017

Reply

Where to buy the replacement mother board? I couldn’t find one.

BTW: Nicely done guide.