Difficulty

Easy

Steps

8

Time Required

                          15 minutes

Sections

2

  • Screen
  • 4 steps
  • Battery
  • 4 steps

Flags

0

  • BackGarmin nuviCam LMTHD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Remove the four 6.9 mm black screws using the T6 screw bit.

Remove the four 6.9 mm black screws using the T6 screw bit.

1024

Step 2

  • Pry the device open using a plastic opening tool.
  • We suggest starting from the dash camera side for easier opening
  • You may have to use a little force, the screen is hard to remove.

Pry the device open using a plastic opening tool.

We suggest starting from the dash camera side for easier opening

You may have to use a little force, the screen is hard to remove.

Step 3

  • Disconnect the black and red wire from the screen.

Disconnect the black and red wire from the screen.

Step 4

  • Disconnect the orange strip by flipping up the connector with a plastic opening tool and sliding the cable out.

Disconnect the orange strip by flipping up the connector with a plastic opening tool and sliding the cable out.

Step 5

              Battery
  • Locate the white box in your device which is the battery.

Locate the white box in your device which is the battery.

Step 6

  • Disconnect battery from device pulling the green, red, and black wires from motherboard.

Disconnect battery from device pulling the green, red, and black wires from motherboard.

Step 7

  • Disconnect orange cable strip laying across battery by sliding it out of connector .
  • It may be at your benefit to use tweezers. It will be easier to reconnect the orange ribbon later with this tool.

Disconnect orange cable strip laying across battery by sliding it out of connector .

It may be at your benefit to use tweezers. It will be easier to reconnect the orange ribbon later with this tool.

Step 8

  • Pry battery out of device.
  • Battery is glued into device, so it may be difficult to remove.

Pry battery out of device.

Battery is glued into device, so it may be difficult to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 4 other contributors 


                    Sarah Myers

Member since: 01/19/2017

424 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team 1-6, Mathisen Winter 2017                        

                                                  Member of Eastern Washington University, Team 1-6, Mathisen Winter 2017 



                    EWU-MATHISEN-W17S1G6                     


                                            4 Members                     


                                            5 Guides authored

John Justin - May 6, 2017

Reply

Where did you buy the battery? What is the voltage/current?

Gary - May 9, 2017

Reply

It is nice to see how to remove the battery, but would like to have one handy before I start. Where can I buy one and what are the specifications?

guy.adamson - Aug 1, 2017

Reply

I believe Garmin Part No. 361-00066-00 is correct (also used in the Nuvi 27xx series). It is available on AMazon and eBay.

Zach - Dec 28, 2021

Reply

Anyone else having issues getting it to charge?

Just shows a red battery with a question mark.