Garmin Nuvi 65Lm Screen Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          3 minutes

Sections

Plastic device casing
3 steps
Screen
1 step

Flags

BackGarmin Nuvi 65LM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Plastic device casing

Place the device on a flat surface with the screen facing down.
Remove the four 4.80 mm T5 screws on the corners of the device with a T5 Torx screwdriver.

Place the device on a flat surface with the screen facing down.

Remove the four 4.80 mm T5 screws on the corners of the device with a T5 Torx screwdriver.

1024

Step 2

There is a ribbon cable that will still connect the front and back panels once they are pried part.
Use the plastic opening tool to gently pry apart the front and back casing panels. Repeat this at multiple locations around the edge of the device. You should hear the clips that hold the front and back together pop apart.
Once there is a large gap between the from and back casing panels, use your hands to separate the two halves.

There is a ribbon cable that will still connect the front and back panels once they are pried part.

Use the plastic opening tool to gently pry apart the front and back casing panels. Repeat this at multiple locations around the edge of the device. You should hear the clips that hold the front and back together pop apart.

Once there is a large gap between the from and back casing panels, use your hands to separate the two halves.

Step 3

Use a spudger to pop up the ZIF connector tab that fastens the ribbon cable to the motherboard.
Gently pull the front panel away and set it on your flat work surface.

Use a spudger to pop up the ZIF connector tab that fastens the ribbon cable to the motherboard.

Gently pull the front panel away and set it on your flat work surface.

Step 4

              Screen

Use the flat end the spudger to push back the casing clips that hold the screen onto the front casing.
Apply light pressure to the front of the screen as you push the casing clips back. This will keep the clips from clicking back into place.
Once all clips are pushed back, the screen will easily lift away from the front casing panel.

Use the flat end the spudger to push back the casing clips that hold the screen onto the front casing.

Apply light pressure to the front of the screen as you push the casing clips back. This will keep the clips from clicking back into place.

Once all clips are pushed back, the screen will easily lift away from the front casing panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    James Crocitto

Member since: 04/23/2015

125 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 15-3, Amido Spring 2015                        

                                                  Member of Cal Poly, Team 15-3, Amido Spring 2015 



                    CPSU-AMIDO-S15S15G3                     


                                            4 Members                     


                                            6 Guides authored

ganesh bhattarai - Aug 21, 2016

Hi where I can get nuvi65lmt screen

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team