Difficulty

Moderate

Steps

5

Time Required

                          6 - 10 minutes

Sections

1

  • Speaker
  • 5 steps

Flags

0

  • BackGarmin Nuvi 56LMT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker
  • Power off you Garmin Nuvi before disassembling.
  • Use the T5 torx screwdriver to remove the four 11.0 mm screws.

Power off you Garmin Nuvi before disassembling.

Use the T5 torx screwdriver to remove the four 11.0 mm screws.

1024

Step 2

  • locate the crevice between the front and back panel.
  • Use the plastic opening tool to wedge the device open.
  • Carefully disconnect the ribbon from the ZIF connector.

locate the crevice between the front and back panel.

Use the plastic opening tool to wedge the device open.

Carefully disconnect the ribbon from the ZIF connector.

Step 3

  • Locate the two 5.0 mm screws and use the T5 Torx screwdriver to remove them.
  • These screws are easily lost so keep track of them.
  • Once the screws are removed flip the motherboard over and locate the blue (+) and black (-) wires connected to the speaker.

Locate the two 5.0 mm screws and use the T5 Torx screwdriver to remove them.

These screws are easily lost so keep track of them.

Once the screws are removed flip the motherboard over and locate the blue (+) and black (-) wires connected to the speaker.

Step 4

  • Use the crimping tool to cut the wires from the motherboard.
  • Use plastic opening tool or fingers to remove the speaker.

Use the crimping tool to cut the wires from the motherboard.

Use plastic opening tool or fingers to remove the speaker.

Step 5

  • Replace speaker and solder the wires back to their original positions (Black negative and Blue positive). How To Solder and Desolder Connections

Replace speaker and solder the wires back to their original positions (Black negative and Blue positive). How To Solder and Desolder Connections

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Dustin Saxon

Member since: 09/28/2017

228 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team S3-G5, Nance Fall 2017                        

                                                  Member of USF Tampa, Team S3-G5, Nance Fall 2017 



                    USFT-NANCE-F17S3G5                     


                                            3 Members                     


                                            4 Guides authored