Garmin Nuvi 2797Lmt Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Speaker
5 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackGarmin Nuvi 2797LMT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker

Before you begin make sure to turn off your GPS.
Using your T-6 Torx Screwdriver, unscrew the ten 2.38 mm torx T-6 screws from the back of your GPS.

Before you begin make sure to turn off your GPS.

Using your T-6 Torx Screwdriver, unscrew the ten 2.38 mm torx T-6 screws from the back of your GPS.

1024

Step 2

Using the biggest plastic opening tool, pry open the GPS from the sides. You should now be able to see everything inside the GPS.
Be careful when opening the GPS because of the ribbon attached to the screen. It can tear easily.

Using the biggest plastic opening tool, pry open the GPS from the sides. You should now be able to see everything inside the GPS.

Be careful when opening the GPS because of the ribbon attached to the screen. It can tear easily.

Step 3

Locate the speaker’s wire connector plugged into the motherboard. Now delicately detach the speaker connector by pulling directly up.

Locate the speaker’s wire connector plugged into the motherboard. Now delicately detach the speaker connector by pulling directly up.

Step 4

Now using the nylon or metal spudger, carefully pry the glue away from the sides of the speaker.
The speaker has been attached with strong glue so you will need to use a little bit of force when prying it out. Also be careful while using the nylon or metal spudger so you don’t get hurt and the device doesn’t get damaged.

Now using the nylon or metal spudger, carefully pry the glue away from the sides of the speaker.

The speaker has been attached with strong glue so you will need to use a little bit of force when prying it out. Also be careful while using the nylon or metal spudger so you don’t get hurt and the device doesn’t get damaged.

Step 5

Now using the plastic opening tool, pry the speaker up from one of the sides. Your speaker will completely come out of the device.

Now using the plastic opening tool, pry the speaker up from one of the sides. Your speaker will completely come out of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Wanda Martinez

Member since: 10/13/2015

212 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Sam Houston State, Team 2-6, Blackburne Fall 2015                        

                                                  Member of Sam Houston State, Team 2-6, Blackburne Fall 2015 



                    SHSU-BLACKBURNE-F15S2G6                     


                                            3 Members                     


                                            4 Guides authored

Incorrect Tools#

Introduction#

What you need#

Team#

Incorrect Tools

Introduction

What you need

Team