Garmin Nuvi 2797Lmt Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 minutes            

Sections

1

• LCD Screen
• 6 steps

Flags

0

• BackGarmin Nuvi 2797LMT

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LCD Screen               

• Before you begin make sure your device is turned off.
• Using your T-6 Torx Screwdriver, unscrew the ten 2.38 mm torx T-6 screws from the back of your GPS.

Before you begin make sure your device is turned off.

Using your T-6 Torx Screwdriver, unscrew the ten 2.38 mm torx T-6 screws from the back of your GPS.

1024

Step 2

• Using the biggest plastic opening tool, pry open the GPS from the sides. You should now be able to see everything inside the GPS.
• Be careful when opening the GPS because of the ribbon attached to the screen. It can tear easily.

Using the biggest plastic opening tool, pry open the GPS from the sides. You should now be able to see everything inside the GPS.

Be careful when opening the GPS because of the ribbon attached to the screen. It can tear easily.

Step 3

• Locate the ribbon attached to the motherboard. Carefully detach the ribbon.

Locate the ribbon attached to the motherboard. Carefully detach the ribbon.

Step 4

• Using your T-4 Torx Screwdriver, unscrew the four 2.38 mm Torx T-4 screws from the back of your screen.

Using your T-4 Torx Screwdriver, unscrew the four 2.38 mm Torx T-4 screws from the back of your screen.

Step 5

• Now pulling up on one of the corners, bring the top half of the casing out of the bottom half.

Now pulling up on one of the corners, bring the top half of the casing out of the bottom half.

Step 6

• Now remove the front casing and back casing away from the screen. You will end up with three separate pieces.

Now remove the front casing and back casing away from the screen. You will end up with three separate pieces.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    baileykaytar                     

Member since: 10/13/2015

318 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Sam Houston State, Team 2-6, Blackburne Fall 2015                        

                                                  Member of Sam Houston State, Team 2-6, Blackburne Fall 2015 



                    SHSU-BLACKBURNE-F15S2G6                     


                                            3 Members                     


                                            4 Guides authored                     

allen1 - May 20, 2019

Reply

Instructions lacking. Go here, https://www.youtube.com/watch?v=iMotyMvC… . Not the exact same Garmin, but virtually the same and worked much better than the instructions here!!

Thomas L Camp - Sep 8, 2022

Reply

Still can’t get my older Garmin back in working order.

where can i take it for someone else to re-cycle it as I have a brand new one .