Garmin Nuvi 2597Lmt Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Battery
4 steps

Flags

BackGarmin Nuvi 2597LMT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Turn your device over so the back is revealed and you can see the screws in the four corners.
Remove the four 3mm width by 6mm length T5 Torx screws using your screwdriver.

Turn your device over so the back is revealed and you can see the screws in the four corners.

Remove the four 3mm width by 6mm length T5 Torx screws using your screwdriver.

1024

Step 2

Use the plastic opening tool to pry open the device at the seam where the two halves meet, prying all along the sides and the top seams if need be.
Do it slowly so you don’t accidently rip the ribbon cable that connects the digitizer to the motherboard, as well as don’t completely separate the halves as this can tear the ribbon cable.

Use the plastic opening tool to pry open the device at the seam where the two halves meet, prying all along the sides and the top seams if need be.

Do it slowly so you don’t accidently rip the ribbon cable that connects the digitizer to the motherboard, as well as don’t completely separate the halves as this can tear the ribbon cable.

Step 3

Locate the battery and then use your spudger to gently lift the battery, which is held to the case using a sticky pad, and free it from its position.
When you remove the battery, do so slowly so that the wires connecting it to the motherboard aren’t torn. The wires will be disconnected in the next step.

Locate the battery and then use your spudger to gently lift the battery, which is held to the case using a sticky pad, and free it from its position.

When you remove the battery, do so slowly so that the wires connecting it to the motherboard aren’t torn. The wires will be disconnected in the next step.

Step 4

Use your hands or a spudger to gently lift the wires from underneath to disconnect the connector from the motherboard.
Once you have disconnected the battery from the motherboard, you can safely set it aside.

Use your hands or a spudger to gently lift the wires from underneath to disconnect the connector from the motherboard.

Once you have disconnected the battery from the motherboard, you can safely set it aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 3 other contributors

                    Patrick McNett

Member since: 10/03/2016

860 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 1-4, Sullivan Fall 2016                        

                                                  Member of USF Tampa, Team 1-4, Sullivan Fall 2016 



                    USFT-SULLIVAN-F16S1G4                     


                                            4 Members                     


                                            5 Guides authored

myfblogin - Nov 20, 2021

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team