Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

  • Garmin Nuvi 2595LMT Back Cover Replacement
  • 3 steps
  • LCD Screen
  • 2 steps

Flags

0

  • BackGarmin Nuvi 2595LMT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Garmin Nuvi 2595LMT Back Cover Replacement               
  • Place the device on the workspace so the screen is facing downward.

Place the device on the workspace so the screen is facing downward.

1024

Step 2

  • Using the t5 screwdriver from the iFixit Pro Tool Kit, remove all four 5.6mm screws placing them safely on the table.

Using the t5 screwdriver from the iFixit Pro Tool Kit, remove all four 5.6mm screws placing them safely on the table.

Step 3

  • Grab a spudger from tool kit.
  • Pry open sides of Nuvi gently with spudger (do not rip apart).
  • Use plastic opening tool to pry ribbon slowly from white plastic bar.
  • Separate the two pieces and place them on the table

Grab a spudger from tool kit.

Pry open sides of Nuvi gently with spudger (do not rip apart).

Use plastic opening tool to pry ribbon slowly from white plastic bar.

Separate the two pieces and place them on the table

Step 4

              LCD Screen               
  • Grabbing the top half of the Nuvi, remove the screen from the tabs holding it in place using thumbs.
  • Place screen on table.

Grabbing the top half of the Nuvi, remove the screen from the tabs holding it in place using thumbs.

Place screen on table.

Step 5

  • Place new screen in proper position, with the ribbon facing downward.

Place new screen in proper position, with the ribbon facing downward.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Taylor DeWitt                     

Member since: 01/06/2016

538 Reputation

                                      4 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Eastern Washington University, Team 2-2, Andersen Winter 2016                        

                                                  Member of Eastern Washington University, Team 2-2, Andersen Winter 2016 



                    EWU-ANDERSEN-W16S2G2                     


                                            5 Members                     


                                            6 Guides authored                     

norman bayne - Oct 4, 2016

Reply

cannot prise open the connector to replace ribbon

cookiecalafato1 - Oct 26, 2016

Reply

My screen is cracked. The screen opens, but I can’t use the key board.

Thank You For any Help You Can Give Me,

Cookie

cookiecaafato1@yahoo.com nuvi 2595 LMT

daBee - Nov 22, 2022

Reply

Re-seating the ribbon is simply impossible.