Garmin Nuvi 2589Lmt Power Button Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 - 20 minutes

Sections

Back Panel Assembly
2 steps
Power Button
5 steps

Flags

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

BackGarmin Nuvi 2589LMT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel Assembly

Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

1024

Step 2

Using the plastic opening tools, pry the shorter sides of the device apart.
Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.
Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

Using the plastic opening tools, pry the shorter sides of the device apart.

Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.

Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

Step 3

              Power Button

Using the angled tweezers, grip the red, black, and green wires connecting the battery to the motherboard, then gently lift away from the motherboard.

Using the angled tweezers, grip the red, black, and green wires connecting the battery to the motherboard, then gently lift away from the motherboard.

Step 4

Using the angled tweezers, grab the microphone wires and gently pull to remove the microphone from the device.

Using the angled tweezers, grab the microphone wires and gently pull to remove the microphone from the device.

Step 5

Using the T5 Torx Screwdriver, remove all 4 of the 4.0 mm screws from the motherboard.

Using the T5 Torx Screwdriver, remove all 4 of the 4.0 mm screws from the motherboard.

Step 6

Using the plastic opening tools gently pry the motherboard away from the case.
There is no need to desolder any connections because the motherboard only needs to be moved out of the way enough to get to the button.

Using the plastic opening tools gently pry the motherboard away from the case.

There is no need to desolder any connections because the motherboard only needs to be moved out of the way enough to get to the button.

Step 7

Using tweezers, lift the button out of its socket.

Using tweezers, lift the button out of its socket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Adam Ferraro

Member since: 10/04/2016

920 Reputation

                                      8 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 1-2, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 1-2, Nance Fall 2016 



                    USFT-NANCE-F16S1G2                     


                                            4 Members                     


                                            8 Guides authored

Inconsistent Images#

Introduction#

What you need#

Team#

Inconsistent Images

Introduction

What you need

Team