Difficulty

Moderate

Steps

8

Time Required

                          30 - 40 minutes

Sections

2

  • Back Panel Assembly
  • 2 steps
  • Motherboard
  • 6 steps

Flags

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackGarmin Nuvi 2589LMT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel Assembly
  • Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

1024

Step 2

  • Using the plastic opening tools, pry the shorter sides of the device apart.
  • Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.
  • Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

Using the plastic opening tools, pry the shorter sides of the device apart.

Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.

Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

Step 3

              Motherboard
  • Using the angled tweezers, grip the red, black, and green wires connecting the battery to the motherboard, then gently lift away from the motherboard.

Using the angled tweezers, grip the red, black, and green wires connecting the battery to the motherboard, then gently lift away from the motherboard.

Step 4

  • Using the tweezers, gently pull the ribbon wiring near where it connects to the motherboard to disconnect it from the motherboard.

Using the tweezers, gently pull the ribbon wiring near where it connects to the motherboard to disconnect it from the motherboard.

Step 5

  • Using tweezers, remove the tape covering the speaker connection to the motherboard.

Using tweezers, remove the tape covering the speaker connection to the motherboard.

Step 6

  • Using a soldering iron, desolder all connections to the motherboard.
  • Learn how to solder and desolder here.

Using a soldering iron, desolder all connections to the motherboard.

Learn how to solder and desolder here.

Step 7

  • Using the T5 Torx Screwdriver, remove all 4 of the 4.0 mm screws from the motherboard.

Using the T5 Torx Screwdriver, remove all 4 of the 4.0 mm screws from the motherboard.

Step 8

  • Using the plastic opening tools gently pry the motherboard away from the case.

Using the plastic opening tools gently pry the motherboard away from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Adam Ferraro

Member since: 10/04/2016

920 Reputation

                                      8 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 1-2, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 1-2, Nance Fall 2016 



                    USFT-NANCE-F16S1G2                     


                                            4 Members                     


                                            8 Guides authored