Garmin Nuvi 2589Lmt Display Assembly Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          10 - 15 minutes            

Sections

2

• Back Panel Assembly
• 2 steps
• Display Assembly
• 1 step

Flags

1

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

• BackGarmin Nuvi 2589LMT

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel Assembly               

• Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

1024

Step 2

• Using the plastic opening tools, pry the shorter sides of the device apart.
• Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.
• Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

Using the plastic opening tools, pry the shorter sides of the device apart.

Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.

Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

Step 3

              Display Assembly               

• Using the tweezers, gently pull the ribbon wiring near where it connects to the motherboard to disconnect the ribbon wiring and the display screen from the motherboard.
• Remove the screen from the device.

Using the tweezers, gently pull the ribbon wiring near where it connects to the motherboard to disconnect the ribbon wiring and the display screen from the motherboard.

Remove the screen from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Adam Ferraro                     

Member since: 10/04/2016

920 Reputation

                                      8 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 1-2, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 1-2, Nance Fall 2016 



                    USFT-NANCE-F16S1G2                     


                                            4 Members                     


                                            8 Guides authored                     

joyarvind - Jul 17, 2017

Reply

Could you please advise where can I find replacement screen for this device

Marty Griffin - Sep 6, 2017

Reply

I got the ribbon off. There is a plastic piece that flops around that the ribbon was adhered to. Will the replacement ribbon have some type of adhesive on it for installation? Thanks.