Garmin Nuvi 2589Lmt Battery Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          10 - 15 minutes            

Sections

2

• Back Panel Assembly
• 2 steps
• Battery
• 2 steps

Flags

0

• BackGarmin Nuvi 2589LMT

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel Assembly               

• Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

1024

Step 2

• Using the plastic opening tools, pry the shorter sides of the device apart.
• Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.
• Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

Using the plastic opening tools, pry the shorter sides of the device apart.

Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.

Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

Step 3

              Battery               

• Using the angled tweezers, grip the red, black, and green wires connecting the battery to the motherboard, then gently lift away from the motherboard.

Using the angled tweezers, grip the red, black, and green wires connecting the battery to the motherboard, then gently lift away from the motherboard.

Step 4

• The battery is held in place by adhesive tape on the underside of the battery.
• Use the opening tools to gently pry underneath the battery and lift upwards to remove the battery.

The battery is held in place by adhesive tape on the underside of the battery.

Use the opening tools to gently pry underneath the battery and lift upwards to remove the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Adam Ferraro                     

Member since: 10/04/2016

920 Reputation

                                      8 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 1-2, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 1-2, Nance Fall 2016 



                    USFT-NANCE-F16S1G2                     


                                            4 Members                     


                                            8 Guides authored                     

stan levin - Nov 30, 2017

Reply

Where can I buy this battery

Stan Levin

where can I buy this battery

Hans-Joachim Böhnke - Sep 19, 2019

Reply

When pulling off the wires, the plug on the motherboard was coming off. How can I fix it again ?