Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

  • Garmin Nuvi 2557LMT Disassembly
  • 4 steps
  • Speaker
  • 2 steps

Flags

0

  • BackGarmin Nuvi 2557LMT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Garmin Nuvi 2557LMT Disassembly
  • Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.

Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.

1024

Step 2

  • Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.

Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.

Step 3

  • There is a visible separation between the front and the back of the device.
  • Using a plastic opening tool, pry open the device along this separation.
  • Trying to open the device on the opposite side will rip the motherboard-display connector.

There is a visible separation between the front and the back of the device.

Using a plastic opening tool, pry open the device along this separation.

Trying to open the device on the opposite side will rip the motherboard-display connector.

Step 4

  • Carefully pull apart the device by opening it up on the opposite side of the nameplate.

Carefully pull apart the device by opening it up on the opposite side of the nameplate.

Step 5

              Speaker
  • Using a plastic opening tool, wedge the speaker from the device.
  • Don’t pull it out of the device too far. It is still connected to the motherboard wire.

Using a plastic opening tool, wedge the speaker from the device.

Don’t pull it out of the device too far. It is still connected to the motherboard wire.

Step 6

  • Using a soldering iron, desolder the wire connection between the speaker and the device.

Using a soldering iron, desolder the wire connection between the speaker and the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Monica Webber

Member since: 03/31/2016

231 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Eastern Washington University, Team 1-3, Giguere Spring 2016                        

                                                  Member of Eastern Washington University, Team 1-3, Giguere Spring 2016 



                    EWU-GIGUERE-S16S1G3                     


                                            5 Members                     


                                            5 Guides authored