Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Garmin Nuvi 2557LMT Disassembly
- 4 steps
Flags
0
BackGarmin Nuvi 2557LMT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Garmin Nuvi 2557LMT Disassembly
- Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.
Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.
1024
Step 2
- Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.
Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.
Step 3
- There is a visible separation between the front and the back of the device.
- Using a plastic opening tool, pry open the device along this separation.
- Trying to open the device on the opposite side will rip the motherboard-display connector.
There is a visible separation between the front and the back of the device.
Using a plastic opening tool, pry open the device along this separation.
Trying to open the device on the opposite side will rip the motherboard-display connector.
Step 4
- Carefully pull apart the device by opening it up on the opposite side of the nameplate.
Carefully pull apart the device by opening it up on the opposite side of the nameplate.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Danis Terzi
Member since: 03/31/2016
349 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
Eastern Washington University, Team 1-3, Giguere Spring 2016
Member of Eastern Washington University, Team 1-3, Giguere Spring 2016
EWU-GIGUERE-S16S1G3
5 Members
5 Guides authored