Garmin Nuvi 2557Lmt Battery Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

• Garmin Nuvi 2557LMT Disassembly
• 4 steps
• Battery
• 2 steps

Flags

0

• BackGarmin Nuvi 2557LMT

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Garmin Nuvi 2557LMT Disassembly               

• Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.

Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.

1024

Step 2

• Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.

Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.

Step 3

• There is a visible separation between the front and the back of the device.
• Using a plastic opening tool, pry open the device along this separation.
• Trying to open the device on the opposite side will rip the motherboard-display connector.

There is a visible separation between the front and the back of the device.

Using a plastic opening tool, pry open the device along this separation.

Trying to open the device on the opposite side will rip the motherboard-display connector.

Step 4

• Carefully pull apart the device by opening it up on the opposite side of the nameplate.

Carefully pull apart the device by opening it up on the opposite side of the nameplate.

Step 5

              Battery               

• Using a plastic opening tool pry the battery away from the device.
• The battery might be glued, so it might require a little bit of force to get it out.

Using a plastic opening tool pry the battery away from the device.

The battery might be glued, so it might require a little bit of force to get it out.

Step 6

• Pull the battery-motherboard connector away from the motherboard.

Pull the battery-motherboard connector away from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Danis Terzi                     

Member since: 03/31/2016

349 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Eastern Washington University, Team 1-3, Giguere Spring 2016                        

                                                  Member of Eastern Washington University, Team 1-3, Giguere Spring 2016 



                    EWU-GIGUERE-S16S1G3                     


                                            5 Members                     


                                            5 Guides authored                     

john horn - Dec 29, 2018

Reply

On my Nuvi 2557, the silver name bezel is part of the front cover - it does not separate. I just split the case as shown.

The battery connector pulls out perpendicular to the pc board, and you re-insert it by aligning and pressing down against the board.

Bill Hines - Jul 26, 2020

Reply

Would this apply to the Nuvi 2555LMT?