Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
2
- Back Cover
- 4 steps
- Screen
- 1 step
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackGarmin nuvi 2460 LMT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Back Cover
- Using a T5 Torx Screwdriver, begin unscrewing the four 11.0 mm screws from the back panel.
Using a T5 Torx Screwdriver, begin unscrewing the four 11.0 mm screws from the back panel.
1024
Step 2
- Using a plastic opening tool or similar object, find the groove in the side of the device and begin prying open the back panel. Work the tool around the entire panel until it pops off.
Using a plastic opening tool or similar object, find the groove in the side of the device and begin prying open the back panel. Work the tool around the entire panel until it pops off.
Step 3
- Lift the beige clamp using a tweezer or your fingernail and remove the connector.
Lift the beige clamp using a tweezer or your fingernail and remove the connector.
Step 4
- Lift the connector gently from the socket, making sure you pull in the right direction.
Lift the connector gently from the socket, making sure you pull in the right direction.
Step 5
Screen
- Pop out the panel along the edges and remove it from the border.
Pop out the panel along the edges and remove it from the border.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Ricardo Audain
Member since: 09/07/2016
623 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 6-4, Remmell Fall 2016
Member of USF Tampa, Team 6-4, Remmell Fall 2016
USFT-REMMELL-F16S6G4
4 Members
7 Guides authored